Is it possible to remove a 4-prong set princess cut stone and replace it with an asscher cut stone of the same measurements?
What does the J Y L stamp mean on a 925 ring?
What does – 14K dscj , on a ring mean? I’m trying to sell it.
I have a white gold ring with a blue zircon. Inside the band it is marked PSTY. Can you tell me what that means?
I was wondering what 14k L1 means when stamped on a gold ring. I know 14k is the carat of gold but the L1 I have no idea about. Im not sure if the diamonds are real or not either but from what ive been told they seem to be… this ring has been passed down in my family for so long i really dont know
I have inherited my mothers wedding ring and would like to have it reset. She had it reset in the 90's on a wide gold band. I would like to have it reset back into a smaller band. Do you do this type of work?
I am looking at two sidestone settings both with 3 diamonds getting larger untill the center stone 1 is 3/4 tatal weight and the other is 1/2 total caret weight my center stone is 1.05 carets my question is what setting would look better and be more pronounced
jacobs and co had you listed as a retailer. The have a setting that I like, but the emerald cut center stone is too square. Do you carry these, and can they be altered?
I am looking for a setting for an emerald cut diamond, baguettes facing N-S tapered in size(if possible, ~3×1.5 type of proportion on baguettes. Ring about 4.5-4.6mm width, ie, not a skinny band. Leo Engwer has one (non-tapered),and Ziva has one but my center stone will only be .8 or so, and this is for 1+carat. Any suggestions? I have been looking at stones at James Allen but tend to like the longer(1.5-1.6+:1)ratios.
I have a beautiful diamond (about 1.5 carats) and gorgeous setting but i am afraid my main stone is getting lost in the setting. Is it possible to raise the setting just a bit so that the diamond pops? I'd love to send a photo so you can see it better. Thank you in advance!
How do I find out how much my Aunt's diamond ring is worth? It's 85 years old and it says customized on the inside. It's made of Platnium and the stone I believe is 1 CT and it has small stones on the side. It's a very old looking setting.
I want to change the 8X7mm 3 ct oblong radiant cut stone to a 9X9MM 4 ct princess cut. I have a custom three stone with .75 trilions on either side in like a basket prong setting. Is this a cheap fix or major work? I have the stone 🙂 My husband won't even know lol
Due to a lost engagement ring I am looking to replace the set (still have the wedding band). How can I sell the wedding ring on my own as the designer will not work directly with me (as a consumer) and the store where I bought it is unwilling to give store credit or trade-in? I've done my "homework" and discovered the cost to replace this piece today has doubled since I bought it. I still have the original receipt, box, etc.
Hello, my fiance bought me a solitare 1 carat emerald cut, but we were wondering if you guys at DCI will can change the setting into a halo setting.
My fiance bought my engagement band from a second party and it reads – 14k LSC Patent Pending
Can you please tell me what the LSC stands for?
I found a mounting for my diamond that I really like but it is casted (vs die-struck). I have read that die-struck engagement rings are more durable. However, am I making a mistake getting a casted engagment ring? The diamond to be mounted is 1.5 carats. I want to make sure the diamond is secure in a casted ring. I wear surgical gloves off and on during the day if that gives you any extra needed information in terms of what I do for a living. I am also deciding between platinum and palladium as far as the metal used for the ring. Any advice would be appreciated.
I have a Platinum ring stamped with "PT". What's the best way to clean the ring at home? I've read online: ammonia + water, toothpaste even??
I notice that after a while my ring feels a bit 'sticky'.
I should note I don't wear my ring in the shower or while cooking, etc?
I have a square princess cut diamond ring on a cathedral setting. On the front (towards my fingers) and back (toward my wrist) of my ring are two diamond shaped cut outs with .08ct of diamonds. I am trying to find a wedding band to go with this but it is hard because of the setting and the diamond cut outs. I don't want a plain band and would like some diamonds on it. I've been told to try a chevron shaped band. Do you have any thoughts? I have a picture I can send if that would help
i have inheret an old diamond ring. inside the ring says 18k and on the otherside inside says DES407113 the numbers are not too clear but not sure if its exactly that number but i'm positive that the three capital letters are DES. please tell me if you can find the ring manufacterer. or the jewelry store where my ring was purchased? please thanks.
I have found a diamond semi mount. It is 1.15 carats and the color of the stones are H and Clarity SI. How will a FOR NOW CZ (1.5 carats) from Body Jewels look with the stones in the setting? I am concerned that the lesser color and clarity in the semi mount will make the center stone look fake. Your help is greatly appreciated and your comments have been extremely helpful!!
My finance proposed & gave me a beautiful engagement ring. After the announcement of our engagement, his mother gave us her wedding band. Unfortunatly the wedding band and my engagement ring do not fit together and have 2 TOTALLY different settings. Could i have my engagement ring setting be re-shaped to match my mother in law's wedding band? Thank you! Emily
My diamond ring size when we bought is seven and my finger size is only 4.75.
It is also a platinum.How do they do it? Do you think that when they re sizing the ring into a smaller size, are they going to give the excess of it or what do they do? Do you think that it will be visible the resizing?
Hello Diamond Guy,
I'm beginning to grow really concerned, my fiance purchased my engagement ring on 2/4/2010 and I got it on the 14th, its a 14ct white gold 1 1/2ct(total weight)it has 3 stones…now bare with me because I'm not the expert you are, it's round cut and the primary diamond color is HI, clarity is I1-I2 the primary diamond weight is 5/8ct, the side stone cuts are 8 round,their min color is HI, and clarity is I1-I2,ok now on to my issue… I had to immediately get it sized, then shortly after it had to be sized again, I brought it in to be checked because the center stone WAS loose… I was told it wasn't well by 9/1/2010 it was loose enough that you couldn't deny it so it got sent out,I asked why it would be loose and was told I must have hit it on something, fine, it came back,I noticed my side stones are not set the same.. shouldn't they be?? or is it normal that one side is clearly set higher than the other??… also my stone was already very loose AGAIN in October 2010… I haven't brought it in yet because I had family I was seeing over the holidays that haven't even seen it yet… should my center stone be coming loose?? and so soon after it was tightened?? I thank you in advance for your help, I may even take it in to a local jeweler to have them take a look and get their opinion also, I can't wait to hear back from you, again thank you sooo much!! Sincerely, Erica Hubert